Jan 21, 2026

What is the impact of aging on NCM battery cells?

Leave a message

Hey there! As a supplier of NCM battery cells, I've seen firsthand how aging can have a real impact on these little powerhouses. In this blog, I'm gonna break down what happens to NCM battery cells as they age, and why it matters to you.

What Are NCM Battery Cells?

First off, let's quickly cover what NCM battery cells are. NCM stands for Nickel-Cobalt-Manganese. These battery cells are super popular because they offer a great balance of energy density, power output, and cost. They're used in all sorts of things, from electric vehicles (EVs) to portable electronics.

The Basics of Battery Aging

All batteries age over time, and NCM battery cells are no exception. Aging is basically a natural process that causes a battery's performance to decline. There are two main factors that contribute to battery aging: calendar aging and cycle aging.

Calendar aging happens even when the battery is just sitting there, not being used. It's mainly caused by chemical reactions inside the battery that occur over time, regardless of how often the battery is charged or discharged.

Cycle aging, on the other hand, is related to the number of charge and discharge cycles a battery goes through. Every time you charge and then discharge a battery, it experiences some wear and tear. The more cycles a battery goes through, the more it ages.

Impact of Aging on NCM Battery Cells

Capacity Loss

One of the most noticeable effects of aging on NCM battery cells is capacity loss. Capacity is basically how much energy a battery can store. As a battery ages, its capacity gradually decreases. This means that over time, your battery won't be able to hold as much charge as it did when it was new.

For example, if you have a 3.67V 78Ah NCM Lithium Ion Battery when it's brand new, it can store 78 ampere-hours of energy. But after a few years of use, that capacity might drop to, say, 70 Ah. This means you'll have to recharge your battery more often, and it won't last as long between charges.

Power Fade

Another impact of aging is power fade. Power is how quickly a battery can deliver energy. As a battery ages, its ability to deliver power decreases. This can be a big problem, especially in applications like electric vehicles, where you need a lot of power to accelerate quickly.

When a battery experiences power fade, it might take longer to charge, and it might not be able to provide as much power when you need it. So, if you're using an NCM battery in an EV, you might notice that your car doesn't accelerate as quickly as it used to, or that it takes longer to recharge.

Internal Resistance Increase

Aging also causes the internal resistance of an NCM battery cell to increase. Internal resistance is like a sort of "friction" inside the battery that resists the flow of electricity. When the internal resistance increases, it means that more energy is wasted as heat when the battery is being charged or discharged.

This not only reduces the efficiency of the battery but also generates more heat, which can further accelerate the aging process. So, it's a bit of a vicious cycle. As the battery ages, the internal resistance goes up, which causes more heat, which then makes the battery age even faster.

Safety Concerns

As NCM battery cells age, there can also be some safety concerns. Over time, the chemical composition of the battery can change, which can make it more prone to things like thermal runaway. Thermal runaway is a situation where the battery overheats and can potentially catch fire or explode.

While modern NCM battery cells are designed with a lot of safety features to prevent this from happening, aging can still increase the risk. That's why it's important to monitor the condition of your batteries regularly and replace them when they start to show signs of significant aging.

Factors That Affect Aging Rate

The rate at which an NCM battery cell ages can vary depending on a few different factors. Here are some of the main ones:

Temperature

Temperature has a huge impact on battery aging. Batteries tend to age faster when they're exposed to high temperatures. This is because high temperatures speed up the chemical reactions inside the battery that cause aging.

On the other hand, very low temperatures can also be bad for batteries. At low temperatures, the battery's performance can be severely reduced, and it might not be able to deliver as much power. So, it's important to keep your batteries at a moderate temperature to extend their lifespan.

State of Charge (SOC)

The state of charge of a battery also affects its aging rate. Batteries tend to age faster when they're kept at a high state of charge for long periods of time. So, if you're not using your battery for a while, it's better to store it at a lower state of charge.

For example, instead of keeping your battery fully charged when you're not using it, it's better to charge it to around 50-60% and then store it. This can significantly slow down the aging process.

Charge and Discharge Rates

The rate at which you charge and discharge your battery can also affect its aging rate. Charging or discharging a battery too quickly can cause more stress on the battery and accelerate the aging process.

So, it's generally better to charge and discharge your battery at a moderate rate. For example, if you're using a 3.7V 147Ah NCM Lithium Ion Battery in an EV, it's better to use a slow or moderate charger instead of a fast charger whenever possible.

43

How to Mitigate the Impact of Aging

While you can't completely stop a battery from aging, there are some things you can do to slow down the aging process and extend the lifespan of your NCM battery cells.

Temperature Management

As I mentioned earlier, temperature has a big impact on battery aging. So, one of the most important things you can do is to manage the temperature of your batteries. This might involve using a cooling system to keep the batteries cool during charging and discharging, or storing them in a cool place when they're not in use.

Proper Charging and Discharging

It's also important to charge and discharge your batteries properly. This means following the manufacturer's recommendations for charging and discharging rates, and avoiding overcharging or over-discharging the battery.

For example, most NCM battery cells are designed to be charged to a maximum voltage of around 4.2V per cell. Charging the battery above this voltage can cause damage and accelerate the aging process.

Regular Monitoring

Regularly monitoring the condition of your batteries is also crucial. You can use a battery management system (BMS) to monitor things like the state of charge, state of health, and temperature of your batteries.

The BMS can alert you if there are any issues with the battery, such as overheating or a significant drop in capacity. This allows you to take action before the battery becomes too damaged.

Conclusion

In conclusion, aging has a significant impact on NCM battery cells. It can cause capacity loss, power fade, an increase in internal resistance, and even safety concerns. However, by understanding the factors that affect battery aging and taking steps to mitigate its impact, you can extend the lifespan of your batteries and get the most out of them.

If you're in the market for high-quality NCM battery cells, we've got you covered. We offer a wide range of Prismatic 3.65V 55Ah NCM Lithium Ion Battery Cell and other NCM battery products to meet your needs. If you're interested in learning more or discussing your specific requirements, don't hesitate to reach out. We're here to help you find the best battery solutions for your applications.

References

  • Arora, P., White, R. E., & Doyle, M. (1999). Comparison of Modeling Predictions with Experimental Data from Plastic Lithium Ion Cells. Journal of the Electrochemical Society, 146(10), 3543-3551.
  • Broussely, M., Biensan, P., Maugard, P., & Delacourt, C. (2004). Calendar life study of Li-ion cells. Journal of Power Sources, 134(1), 113-120.
  • Xia, G., Zheng, G., & Cui, Y. (2019). Recent Progress in High-Energy Lithium–Sulfur Batteries. Chemical Reviews, 119(12), 7193-7237.
Send Inquiry